Agamemnon's Helmet Mini Display NO AMS

Agamemnon's Helmet Mini Display NO AMS   Add a peice of fantasy and history to your desk. When designing my hoplite I performed a few test prints to ensure the peices fit togther, one such test was multiple versions of the helmet, which on its own makes a great display peice for all those Odyssey film fans.  Moddeled by hand and seperated for ease of printing and time considerations as well as wasteage.    Assembley is simple and intuative. When assembling the helmet be sure to glue and to do the top up to feathers first, letting that dry before gluing the rear spine tail on.   📌 Recommended printing settings: Material: PLA Layer height: 0.16 mm Infill: 15% Nozzle: 0.4mm supports where nessesary - I have tried to make it so all have a surface contacting the plate however due to the detail and complexity of the modeling they sometimes require alot of support, so be aware and be carefull during support removal. Use a naked flame gentley and for short intervals to clean surfaces after removal   Assembly – Recommended Method on multipart models Dry fit: Assemble all parts without glue to check alignment and fit. Cleanup: Lightly deburr edges and pegs where nessesary with a file/modeling tool to ensure uniform contact. All parts are tested and fit together. Optional fix: Use glue for permanent assembly.