RoboPrinter: P2S Transforming Robot | No Supports

So, what kind of person are you? Maybe you're looking for something to print before bed. Or maybe you just wandered in looking for something fun. Either way, I think this one's for you.   RoboPrinter: P2S turns the enclosed P2S 3D printer into a transforming robot. Packed with detail, a full transformation, and ratchet joints throughout — have fun with it!   Want to keep print time to a minimum? → Go with the 1Plate 1Color profile. Want to take it one phase at a time, without losing a single part along the way? → Go with the 1Plate 1Phase profile. --- 致中国的朋友们 大家好！我在那边没法回复评论，只能在这里跟大家打个招呼，还请见谅。 上次说明书用了大家不太方便打开的方式，很抱歉。这次我做了纸质版说明书，变形教程视频也传到了B站（UP主：六次元创世）。说明书最后附了个二维码，需要的话扫一下就能直接看到。 你们的评论我一直都有在看，谢谢大家一直以来的支持！   Boost MeNot a P2S owner? Would you like to see your printer transform too? Boosts keep this project going and help me decide which machine gets built next. Yours could be the one. No AMS required. No supports or glue required. Successfully tested with PLA Basic, PETG, and ABS. PLA Matte and PLA Silk are not recommended. If any parts other than the joints come loose easily, we recommend securing them with glue. For the glass parts (front door and top cover), please use the separate print profile provided. For the PETG Translucent version, a 0.6 mm nozzle with a High Temp / Smooth PEI plate gives the most consistent results and the best print quality. A 0.4 mm nozzle also works, but be very careful when removing the parts from the plate.   It is recommended to use tools like long-nose pliers during assembly.   When inserting parts with round shafts, if the fit feels too tight, try slowly pushing them in while twisting them side to side   Create your very own RoboPrinter: P2S using different color combinations!