Solo Leveling Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.3mm and the Actual Depth is 2.2mm Filaments Used:     PLA BambuLab Basic Black Transmission Distance: 0.6     PLA+ Sunlu Red Transmission Distance: 6     PLA BambuLab Basic Jade White Transmission Distance: 5     PLA+ Sunlu Grey Transmission Distance: 2 This print uses 4 unique filaments Swap Instructions:     Start with Black     At layer #3 (0.32mm) swap to Red     At layer #9 (0.8mm) swap to Jade White     At layer #16 (1.36mm) swap to Black     At layer #18 (1.52mm) swap to Grey     At layer #21 (1.76mm) swap to Jade White for the rest.