Eevee & Evolutions Silhouette Sculpture

Bring the entire Eevee family to your desk or shelf with this elegant, circular silhouette display stand. This model features Eevee at the center, with all eight evolutions radiating outward in a harmonious, interconnected design. It is perfect for Pokémon fans looking for a subtle yet complete decor piece. This is a no-supports print. The main circular body fits easily into the provided slotted base for a stable standing display. It looks fantastic in black as a silhouette, but feel free to experiment with colors! Important Printing Notes regarding Layer Height: The model shown in the photos was printed at 0.2mm layer height to capture the sharpest details on the smaller Eeveelutions and the connecting lines. This is the recommended setting for the best visual result. However, if you are looking for a faster print, this model still looks great printed at 0.4mm layer height. While you might lose a tiny bit of definition on the finest points, it prints significantly faster and retains its overall beauty.   Recommended Print Profile & Settings: Material: PLA (High-Quality or Silk PLA recommended for details) Layer Height: 0.12mm - 0.16mm (for fine detail resolution) Infill: 15% - 20% (Grid or Gyroid) Supports: no supports requieres! Perimeters/Walls: 2 - 4 loops Outer Wall Print Speed: 50mm/s - 60mm/s (slow down for better detail quality) Build Plate Adhesion: Use a clean PEI or glass bed with a raft or brim for stability, especially for larger prints.