2mm Ball Roller | Acrylic Nail & Polymer Clay

Same as the 3mm version, just slightly smaller! Create perfectly uniform 2mm balls for acrylic nail art, gel, polymer clay, fondant, or other small crafting projects. Simply place a small amount of material between the two plates and roll them together. The matching grooves guide the material into consistent 2mm spheres with very little effort.   Features ✔ Creates consistent 2mm balls ✔ Two-piece matching roller design ✔ Works with acrylic nail products, polymer clay, and similar soft materials ✔ Fast and easy to use ✔ No supports required ✔ Prints quickly Printing Material: PLA, PETG, or ABS Layer Height: 0.16–0.20 mm Infill: 15–20% Supports: None Orientation: Print both halves flat on the build plate (as supplied). A smooth build plate produces the nicest finish.   Notes This tool is designed for soft, pliable materials. Results will vary depending on the consistency of the material being rolled and the amount used. If the balls are slightly oversized, simply use a little less material. After one or two tries you'll quickly get a feel for the correct amount.