Flexible Dragonite Pokémon Fidget Keychain / Toy

Welcome to the Wiggle-Zone! Bring home everyone's favorite chubby orange dragon in a whole new way. This is a fully Print-in-Place Articulated Dragonite. No assembly required, no messy supports—just print, remove from the bed, and enjoy the satisfying wiggle! It’s an amazing fidget toy for Pokémon fans, a cute desk companion, or a unique gift. It has been meticulously designed with interlocking segments that ensure smooth movement from head to tail. 📥 Print Profile & Recommended Settings Please note: For best results, use the provided print profile. If you slice it yourself, follow the settings below: Material: PLA (works best for tight tolerances and smooth movement). Layer Height: 0.16 mm or 0.20 mm. Infill: 5% – 15% (Gyroid or Grid pattern recommended). Walls / Perimeters: 2-3 Walls (essential for strong, durable joints). Supports: No required! But if you have problems you can enable them! Bed Adhesion: A Brim or Skirt is recommended if you experience bed adhesion issues, as the tail tip is relatively small. Print Speed: Moderate to slow speed for the first layer to ensure the small individual segments stick properly to the build plate.