PopTop Pro

PopTop Pro Series Say goodbye to rubber bands. The next evolution in drink covers features all-metal hardware. The PopTop Pro series are lightweight, spring-loaded lids for various sizes of aluminum cans and drink coolers. They quickly snap into place on your favorite beverage and are ready to open at the press of a button!   Close fitting lid keeps bugs, ash, and debris from getting into your drink while you recline by the campfire. Lid springs open at the push of a button. Custom text and logos can easily be added to the large flat surface of the lid. Compatible with the PopTop Koozie When your beverage is finished and you wish to remove the PopTop: Open the PopTop's lid. Use two hands to gently pry open the hinge at the rear of the collar. Lift the PopTop off of the can. Print Profile Sizes PopTop Pro VersionCan/Cooler SizeCommon VolumesSuch AsLiteStandard width (Ø2.60" / Ø66mm) 12oz / 355mL 16oz / 473mL 16.9oz / 500mL 19.2oz / 568mL Coca-Cola, MonsterSlimSlim width (US) (Ø2.27" / Ø57.6mm) 7.5oz / 222mL 12oz / 355mL Celsius, Red BullMiniNarrow width (Ø2.09" / Ø53mm) 8.4oz / 250mLRed BullMaxUltra wide (Ø2.86" / Ø72.6mm) 22oz / 650mLArizona Iced TeaYetiYeti Colster (quarter & full turn)  Yeti SlimYeti Slim Colster  BuddyFrost Buddy Universal Buddy          Printing Tips Due to natural variation in filaments and printers, the paddle's press fit into the collar can vary. Some print profiles include two sizes of the paddle. The smaller is marked with a “-” and the larger with a “+”. Always clean your build plate with water and mild soap. Supports must be enabled - The collar and lid are designed to be printed with supports. Layer Heights - The collar and lid are printed at 0.2mm layer heights, while the paddle/button must be printed at 0.12mm. No Brims - Brims are not required for any components. Recommended Material - PLA Basic, PLA Matte, PLA Silk, ABS-GF, and PETG filaments have all been tested successfully.   MembershipCommercial Licensing for the PopTop series is available for members.Boost MeThe PopTop series has been a challenging and fun design task. With dozens of revisions and multiple rounds of third-party Beta testing, the designs are something that I am quite proud of. If you would like to show your appreciation for my work and would like to see more, please consider giving me a Boost!Revision History 2026-7-16     v1.0  Released.     Interested in some of my other works?