50 Cal Machine Gun M2 No-AMS

Awesome highly detailed M2 50 Cal Machine Gun prop. No supports required.    Boost MeBoost For Free To Support My Work!!  Assembly - Check uploaded pictures to find the parts breakdown. Trigger base handles - snap into Trigger base. Trigger base - snaps into rear of receiver. Charging handle inserts into Charging Handle lever, and that assembly inserts into the hole on the right side of the receiver. Rear sight snaps into the top rear of the Receiver. Front sight snaps into the front top of the Receiver. The 3 Tripod Legs put together form a diamond shape at the top, and that is inserted into the diamond cut out shape on the bottom of the Receiver. Barrel gets inserted into the front of the Receiver. All parts will stay together pretty well if left on a shelf on display, but apply glue if you want them to be extra secure.   Size - When assembled, it measures out to122mm tall (from top of front sight to ground), 190mm wide (widest point is rear tripod legs width), 460mm long (from tip of barrel to rear tripod legs).    This model can be printed in multiple ways. Multi-color no AMS on 2 plates (1 color per plate). Single color on 1 plate. Parts are broken down to separate objects so you can move parts around as you please to print. I recommend using brims on most of the parts, the brims will generate if you use included print profiles.    It can be easily printed on:   Standard Size Printers  Bambu Lab P1P Bambu Lab P1S Bambu Lab X1 Bambu Lab X1C Bambu Lab X1E Bambu Lab A1 (full‑size, not Mini) Large Size Printers Bambu Lab H2D Bambu Lab H2S H2C  Thanks for your support!!