Dummy 13 C14 Timberwolf Sniper gun

This rifle is the Canadian service sniper rifle, the C14 Timberwolf. It comes with a standing tripod and can be fully assembled. The tripod features adjustable height, and both the rifle and the tripod can be detached from each other.     ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ   Please Read: Assembly Instructions Please Read: Assembly Instructions Please Read: Assembly Instructions           First, insert all three long rods into the center hub. They should fit in easily. (Make sure to check the orientation of the center hub before assembly.)         Next, locate the three-point star-shaped part and attach it to one of the three holes on each tripod leg. Important: Do not position it at a 90° angle during installation. If you do, it can easily come loose.         At this step, the triangular part may not fit perfectly at first. Try rotating it until you find the correct orientation, then press it in firmly. (This was a design tolerance mistake on my part—sorry about that! 😭) It will fit securely once aligned correctly. It is not impossible to assemble. Please take a moment to find the correct orientation.       Attach the center section, then use the small pin to adjust the height. At the top of the center pole, there is a mount for attaching the C14 rifle. Simply snap the mount onto the round attachment point on the C14. Once attached, it moves smoothly and works great as a display piece. Please note that it is not designed for rough play, as some parts may be fragile. A little patience during assembly will go a long way!         Thank you, everyone! I hope you enjoy building and displaying it. Have fun!