Variegated monstera wall plates

These decorative wall plates feature a Monstera leaf shape with a variegated pattern designed for printing in two contrasting colors.   The set includes three designs: Duplex outlet wall plate Standard toggle switch wall plate Rectangular rocker/Decora-style switch wall plate Designed for flat, multicolor printing using an AMS system. Supports are not required.   Size: Outer dimensions: 15.32 × 16.86 × 0.54 cm / 6.03 × 6.64 × 0.21 inch Cutout dimensions: 11 × 6.6 × 0.3 cm / 4.33 × 2.60 × 0.12 inch Please compare the model dimensions with your existing switches, outlets and screw positions before printing, as electrical fittings and standards vary between countries and manufacturers. Important - Safety Disclaimer This 3D model is provided “as is” and is intended only as a decorative wall plate design. The accuracy, dimensions, fit, strength, heat resistance and electrical safety of the printed part are not guaranteed. Electrical fittings and installation requirements may vary between countries, manufacturers and individual installations.   The user is fully responsible for: Checking all dimensions and screw positions before printing Selecting a suitable material and print settings Testing the finished part before installation Ensuring compliance with applicable electrical and building regulations Disconnecting the power before removing or installing any wall plate Using a qualified electrician when required The printed cover must not be used as electrical insulation or placed in contact with exposed or live electrical components.   By downloading, printing or using this model, you accept all associated risks. The creator is not responsible for injury, damage, electrical faults, fire, installation problems, incompatibility or any other issues resulting from printing, installing or using the model.