Spider-Man - The Web Slinger | Multipart no AMS

Spider-Man - The Web Slinger Dynamic and powerful web-slinging Spider-Man captured in an iconic action pose, shooting thick, detailed web beams from both hands that impact the ground with impressive splashes. This fully multipart model features easy snap-fit assembly with no glue required.   Part of my Legends Unleashed series, this model brings the classic web-slinger to life with high-detail sculpting optimized for Bambu Studio. The thick web beams and ground impact splashes add real visual drama and make it stand out on any shelf or display. Print profile 100% scale = 189 mm × 150 mm × 232 mm Layer Height: 0.16-0.2 mm Walls: 2–3 Infill: 5–30% (uses lower end for large parts to save filament/time; higher end for small/functional parts and connectors to boost durability and prevent breakage during repeated assembly/disassembly) Speed: Small parts operate at a slower speed than other parts. Supports: Tree supports are automatically generated Color Handling: Multipart design → no AMS required. Print plates separately in desired filaments. You can also rearrange the parts onto different plates if you want to mix the colors in a more unique way. Plates Assembly instruction This multipart model is designed for effortless, glueless assembly! Snap everything together using the peg connectors. No glue required for a secure, satisfying fit. Preparation Carefully remove tree supports before assembly. Tree supports release most cleanly when cut between branches… snap them away without stressing surfaces. Peg Connections Almost all parts use the same snap-fit peg systemPegs are intentionally tight for rock-solid hold → align and then push firmly until you feel/hear the snap. If too tight → lightly trim peg domes (green) with a knife. If slightly loose → a tiny drop of superglue fixes it instantly. Smaller pegs may feel less "clicky" than larger ones but still provide reliable strength. Orientation Note: Left (L) and Right (R) are labeled based on the character’s own perspective, not the viewer’s. For example, the character’s right eye is marked as R, even if it appears on the left side when viewed from the front. Spider Noir - The Perched Phantom | no AMS