Toothless - figurine (AMS Version + NO AMS)

Se desideri light fury clicca sull'immagine:   🐉 Toothless (Night Fury) - 3D Print Style Figurine (No AMS) A stunning reproduction inspired by Toothless, carefully modeled and optimized for FDM or resin 3D printing. This version is designed to highlight layer textures, simulating the authentic look of a beautifully finished 3D-printed collectible with crisp, clean details. 🚫 Optimized for Single-Extruder Printing (No AMS / No MMU) This model has been specifically designed to be printed without the need for multi-color systems like Bambu Lab's AMS. Body and Eyes: Print the entire model in black. The iconic green eyes and dark pupils are geometrically separated or raised, allowing for easy post-print painting (e.g., with acrylics or paint markers) or simple filament swaps at the designated layers. Zero Waste: No purge tower or color-switching flushes needed, saving you both time and material. 🛠️ Recommended Print Settings Layer Height: 0.12mm or 0.16mm (Fine or Extra Fine profile) to ensure the curves of the head and wings are smooth while making the scale details pop. Infill: 10% - 15% (Gyroid is highly recommended for optimal structural strength). Supports: Minimal Tree supports may be required only under the wings and the lower jaw. Bed Adhesion: A textured PEI plate will perfectly complement the texture of the base. 💡 Maker Note: If you love the model and enjoy saving filament by skipping the AMS, please leave a like and share your print in the "Makes" section!