Pokemon #131 - Lapras kit card

Bring the magic of Pokémon to life with this Lapras kit card!   This model prints flat and transforms into a fully assembled ~85mm display figurine of Lapras that can stand on its own. Simply print, pop the pieces out, and assemble. Features: Compact, print-in-place style kit card Cleanly separated parts for easy removal Designed for FDM 3D printing Beginner-friendly assembly Accurate proportions inspired by the classic Pokémon design Printing Notes: This kit card requires an AMS. Ensure the print bed is clean before printing. Let the print bed cool completely before removing the print. Removing early may warp the piece. A pause is included at layer 9 to switch in the 2 additional colors (Black & Blue). The last active slot is going to be the Light Blue one, so use either of the other 3 for the switch. While it may be possible to print a smaller or larger version, tolerances have not been tested for other sizes, so print at your own risk! Assembly Notes: There are a grand total of 12 pieces. The small connectors are all throwaways Some of these pieces can be a little fragile due to their size. For better results, use a flush cutter when trimming and clean up with a knife Assembly GIF below, though hopefully most pieces are self explanatory!