PokéPoppers

It's a squishable pokéball with a satisfying click and rebound. Very fidgety. Much wow.

Requires a rubber band, preferably a thin one. The rubber band can be wrapped around twice if it is too loose. I've found that the thick ring on balloons work really well too. Don't worry about the color as the rubber band is hidden within the pokéball. It's honestly quite fun to fidget with even without rubber bands so feel free to print even if you don't have rubber bands on hand.

This design was inspired by the PentaClick by YosaNatural. Do go check it out!

Assembly:

p.s.   dont judge too hard its my first ever video

Note: Forgot to mention this in the video, but there is custom support on the button piece that is to be removed before assembling, circled in red below.

If you have any other questions, feel free to comment or message me.

fun little tip: If you have an AMS and a standard bed size, I recommend bringing all the parts onto one plate and setting the print sequence to ‘by object’ to print all the parts on one plate. It can cut off an hour of print time.